Designed & Developed in San Luis Obispo, CA | Veteran Owned | Blue uas
HEAVY-LIFT DRONE
Blue UAS Compliant Commercial Heavy-Lift Hexacopter Drone
Initially built for Department of Defense customers, the IF1200 was designed to support heavier lift capacities, longer flight times, and more rugged operation than the foreign-made systems it was replacing.
Designed with an open-system architecture, the IF1200 can be configured for any aerial application and integrated with third party technology to achieve a specific capability.
The IF1200 offers a variety of pre-integrated payloads chosen specifically for each industry.
The IF1200 hexacopter paired with a Lidar sensor creates a powerful solution for many GIS applications. With pinpoint accuracy and over 30 minute flight times, you’ll be ready to survey large acreage sites efficiently & reliably. Visit our Applications page for all our integrated lidar solutions and send us an inquiry with any specific technical requirements your application calls for.
200+ Points
per square meter
AGL
100-120M AGL
100+ Acres
one flight
3.8CM
@50M AGL
1.73kg
total weight
Working with Industry Leaders To Provide Our Best Product
The IF1200 hexacopter paired with Lidar USA’s Revolution 120 creates a powerful solution for many GIS applications. With sub 4cm accuracy and >30 minute fligh times, you’ll be ready to survey large acreage sites efficiently & reliably. Visit our application spage for all our integrated lidar solutoins and send us an inquiry with any specific technical requirements your application calls for.
200+ Points
per square meter
AGL
100-120M AGL
100+ Acres
one flight
3.8CM
@50M AGL
1.73KG
A variety of available UART, PWM, USB, GPIO, and auxiliary power rails allow for custom payload configurations. See UPI datasheet
The IF1200 maintains strict compliance to evolving US Government regulations regarding Chinese components. All development, production, and testing takes place at our California HQ and leverages domestically-sourced electronics.
Dimensions
1445 x 1215 x 705 mm
flight time
40 min
max takeoff weight
20.0 kg (44.0 lbs)
max payload weight
8.0 kg (17.6 lbs)
wind resistance
Continuous – 10 m/s (19.4 knots) Gusts – 12 m/s (23.3 knots)
max drone speed
Ascent – 5 m/s (11.2 mph) Descent – 3 m/s (6.7 mph) Ground – 18 m/s (40.3 mph)
operating temperatures
-10°C – 40°C (14°F – 104°F)
OPERATING TEMPERATURES
PX4 (Modified Hexarotor 6001)
Dimensions
1445 x 1315 x 705 mm (56.9 x 51.8 x 27.8 inches)
flight time
24 min
MAX TAKEOFF WEIGHT
22.0 kg (48.5 lbs)
MAX PAYLOAD WEIGHT
8.6 kg (19 lbs)
WIND RESISTANCE
Continuous – 10 m/s (19.4 knots) Gusts – 12 m/s (23.3 knots)
MAX DRONE SPEED
Ascent – 5 m/s (16 ft/s) Descent – 3 m/s (10 ft/s) Ground – 22 m/s (49 mph)
OPERATING TEMPERATURES
-10°C – 40°C (14°F – 104°F)
OPERATING Software
PX4 (Modified Hexarotor 6001)
8 kg
40 min
10 km
PX4
Max Payload
max endurance
signal range
software
6 kg
38 min
5 km
DJI SDK
Dimensions
1445 x 1215 x 705 mm
flight time
40 min
max takeoff weight
20.0 kg (44.0 lbs)
max payload weight
8.0 kg (17.6 lbs)
wind resistance
Continuous – 10 m/s (19.4 knots) Gusts – 12 m/s (23.3 knots)
max drone speed
Ascent – 5 m/s (11.2 mph) Descent – 3 m/s (6.7 mph) Ground – 18 m/s (40.3 mph)
operating temperatures
-10°C – 40°C (14°F – 104°F)
operating software
PX4 (Modified Hexarotor 6001)
8 kg
40 min
10 km
PX4
Max Payload
max endurance
signal range
software
6 kg
38 min
5 km
DJI SDK
The rugged IF1200 travel case safely transports the IF1200 to the worksite and can be checked on commercial aircraft.
A Carbon Fiber & Aluminium airframe couple to create a durable & rugged UAV.
2 Spare propellers included with IF1200
A reliable power source for the IF1200 system.
UAS
Pages
Drones
Pages